Do not tamper with, sidestep, eliminate or bypass the safety and warning devices
installed on the machine. Non-compliance with this requirement can cause serious risks
and can compromise the safety of people.
Never
start the machine with the fixed or mobile guards disassembled.
Never
inhibit the emergency features installed on the machine.
The r
egulating operations, with reduced safety, must be done by a qualified technician
and during their progress it is necessary to prevent access to the machine by
unauthorized persons.
Aft
er adjusting the machine under reduced safety conditions, restore proper safety
conditions as soon as possible.
Make sur
e that the machine is connected to an efficient earthing circuit.
Do not
modify, for any reason, any part of the machine in order to adapt other devices.
In case this condition is not respected, the Builder CANNOT be held responsible for
malfunction or other related problems. Request any modifications to the Builder’s
Commercial or Technical Office.
When in
use, some parts of the machine are subject to dangerous voltage. Disconnect
power supply and block reinsertion devices before servicing the machine or any
equipment connected to it.
Ever
y intervention on the system or the equipment must be exclusively carried out by
qualified electrical maintenance workers.
Prevent water from dripping onto the electrical panel.
CEC BASE IGM REV13 11
To Next Page
Loading...
Need help?
General
