94
Conventions Used in this Section Section 5-1
5-1 Conventions Used in this Section
5-1-1 Meanings of Icons Used in this Section
Describes the functions of the parameter.
Describes the setting range and default of the parameter.
Used to indicate parameters used only for monitoring.
Describes the parameter settings, such as those for Operation Commands,
and procedures.
Used to indicate information on descriptions in which the parameter is used or
the names of related parameters.
5-1-2 About Related Parameter Displays
Parameters are displayed only when the conditions for use given on the right
of the parameter heading are satisfied. Protected parameters are not dis-
played regardless of the conditions for use, but the settings of these parame-
ters are still valid.
5-1-3 About the Order in Which Parameters Are Described in This
Section
Parameters are described level by level.
The first page of each level describes the parameters in the level and the pro-
cedure to switch between parameters.
Function
Setting
Monitor
Operation
See
See
at
Displayed symbol
AT Execute/Cancel
Parameter name
The E5CZ must be in operation, and
control must be 2-PID control.
Conditions for use
To Next Page
Loading...
Need help?
General
