Omron E5CZ User Manual

174
Appendix A
Setting Levels Diagram
This diagram shows all of the setting levels. To move to the advanced function setting level , you must enter
passwords. Some parameters are not displayed depending on the protect level setting and the conditions of
use.
Control stops when you move from the operation level to the initial setting level.
Note (1) Moves to operation level by software reset.
(2) From the manual control level, key operations can be used to move to the operation level only.
(See
note
2.)
(See
note 1.)
Power ON
Started in manual mode.
Manual
mode
Press the O Key
for at least 1 s.
Press the O Key for
at least 1 s; display
will flash.
Press the Ol Key for
at least 3 s while a-m
Manual Control
Level
Operation Level
Press the
O Key
for at
least 1 s.
Initial Setting Level
Press the O Key
for at least 1 s.
Advanced Function
Setting Level
Input password.
Set value −169
Press the
O Key less than 1 s.
Communi-
cations
Setting
Press the O Key for at
least 1 s; display will flash.
Press the O Key for at
least 3 s.
Control stops.
Press the
O Key for less than 1 s.
Adjustment Level
Press the O
+ M Keys for
at least 1 s.
Press the O +
M keys; display
will flash.
Press the O +
M Keys for at
least 3 s. (See
note.)
Protect level
Note: The time taken to move
to the protect level can
be adjusted by
changing the "Move to
protect level time"
Control in progress
Level change
Not displayed for some models
Control stopped
Started in automatic mode.
a-m
C
25
100
C
25
100
C

Omron E5CZ Specifications

General

Brand	Omron
Model	E5CZ
Category	Temperature Controller
Language	English