Omron NX-EC0122 User Manual

27
Related Manuals
NX-series Position Interface Units User’s Manual (W524)
Related Manuals
The following manuals are related. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series Position Inter-
face Units User’s Man-
ual (this manual)
W524 NX-EC0
NX-ECS
NX-PG0
Learning how to
use NX-series
Position Interface
Units
The hardware, setup, and functions for
the NX-series Incremental Encoder
Input Units, SSI Input Units, and Pulse
Output Unit are described.
NX-series Data Refer-
ence Manual
W525 NX- Referencing lists of
the data that is
required to config-
ure systems with
NX-series Units
Lists of the power consumptions,
weights, and other NX Unit data that is
required to configure systems with
NX-series Units are provided.
NX-series Digital I/O
Units User’s Manual
W521 NX-ID
NX-IA
NX-OC
NX-OD
Learning how to
use NX-series Dig-
ital I/O Units
The hardware, setup methods, and
functions of the NX-series Digital I/O
Units are described.
NX-series System Units
User’s Manual
W523 NX-PD1
NX-PF0
NX-PC0
NX-TBX01
Learning how to
use NX-series
System Units
The hardware and functions of the
NX-series System Units are described.
Sysmac Studio Version
1 Operation Manual
W504 SYSMAC-
SE2
Learning about the
operating proce-
dures and func-
tions of the
Sysmac Studio.
Describes the operating procedures of
the Sysmac Studio.
NJ/NX-series Trouble-
shooting Manual
W503 NX701-
NJ501-
NJ301-
NJ101-
Learning about the
errors that may be
detected in an
NJ/NX-series Con-
troller.
Concepts on managing errors that may
be detected in an NJ/NX-series Con-
troller and information on individual
errors are described.
Use this manual together with the
NJ-series CPU Unit Hardware User's
Manual (Cat. No. W500) or NX-series
CPU Unit Hardware User’s Manual
(Cat. No. W535) and with the
NJ/NX-series CPU Unit Software
User's Manual (Cat. No. W501).
NX-series EtherCAT
Coupler Unit User’s
Manual
W519 NX-ECC20 Learning how to
use an NX-series
EtherCAT Coupler
Unit and Ether-
CAT Slave Termi-
nals
The following items are described: the
overall system and configuration meth-
ods of an EtherCAT Slave Terminal
(which consists of an NX-series Ether-
CAT Coupler Unit and NX Units), and
information on hardware, setup, and
functions to set up, control, and monitor
NX Units through EtherCAT.
NX-series Ether-
Net/IP™ Coupler Unit
User's Manual
W536 NX-EIC Learning how to
use an NX-series
EtherNet/IP Cou-
pler Unit and Eth-
erNet/IP Slave
Terminals
The following items are described: the
overall system and configuration meth-
ods of an EtherNet/IP Slave Terminal
(whi
ch
consists of an NX-series Ether-
Net/IP Coupler Unit and NX Units), and
information on hardware, setup, and
functions to set up, control, and monitor
NX Units through EtherNet/IP.

Omron NX-EC0122 Specifications

General

Brand	Omron
Model	NX-EC0122
Category	Controller
Language	English