Omron SYSMAC CS/CJ Series User Manual

329
PLC Comparison Charts Appendix A
External mem-
ory
Medium Memory card
(Flash ROM)
Memory card
(Flash ROM)
Memory cas-
sette
(EEPROM,
EPROM)
Memory card
(RAM,
EEPROM,
EPROM)
Memory cas-
sette (ROM,
EEPROM,
EPROM)
Capacity 48 Mbytes 48 Mbytes 4 to 32 Kwords
(4 to 64 Kwords
for -Z)
32 to 512
Kwords (RAM:
64 to
512 Kbytes,
EEPROM: 64
to 128 Kbytes,
EPROM: 0.5 to
1 Mbytes
4 to 16 Kwords
Contents Programs, I/O mem-
ory, parameters
Programs, I/O
memory, parame-
ters
Programs, I/O
memory,
parameters
Programs, I/O
memory,
parameters
Programs,
read-only DM,
parameters
Read/write method Programming Device,
user program (file
memory instructions),
or Host Link
Programming
Device, user pro-
gram (file mem-
ory instructions),
or Host Link
Turning ON SR
bit
Programming
Device, user
program (file
memory
instructions),
Host Link, or
Memory Card
Writer
Turning ON AR
bit
File format Binary Binary Binary Binary Binary
Extended Data Mem-
ory handled as files
Yes (except for CJ1M
CPU Units)
Yes No No No
Programs automati-
cally transferred at
startup
Yes Yes Yes Yes Yes
Inner Board No Serial Communi-
cations Board
Communica-
tions Board
No Communica-
tions Board
Built-in serial ports Yes (RS-232C x 1) Yes (RS-232C x
1)
Yes (RS-232C x
1)
Yes RS-232C
or
RS-422 x 1)
Yes (RS-232C
x 1)
Serial communi-
cations
Pe-
ripher-
al port
Peripheral
bus
Yes Yes Yes Yes Yes
Host Link
(SYSMAC
WAY)
Yes Yes Yes No
(Possible with
connection to
peripheral
interface)
Yes
No protocol No No Yes No Yes
NT Link Yes Yes No No No
CPU
Unit
built-in
RS-
232C
port
Peripheral
bus
Yes Yes Yes No No
Host Link
(SYSMAC
WAY)
Yes Yes Yes Yes Yes
No protocol Yes Yes Yes No Yes
NT Link Yes (1:N) Yes (1:N) Yes No Yes (1:1)
Serial PLC
Links
Yes (CJ1M only) No No No No
RS-
232C
or RS-
422/
RS-
485 on
Com-
muni-
cations
Board
Peripheral
bus
No No Yes No No
Host Link
(SYSMAC
WAY)
No Yes
The WG, MP, and
CR commands
are not sup-
ported.
Yes
The CR com-
mand is not
supported.
Yes
The WG and
MP com-
mands are not
supported.
Yes
The CR com-
mand is not
supported.
No protocol No No Yes No Yes
NT Link No Yes Yes No Yes (1:1 and
1:N)
Protocol
macro
No Yes Yes No Yes
CompoWay/
F Master
No Yes (using proto-
col macro)
Yes (using pro-
tocol macro)
No Yes (using pro-
tocol macro)
Item CJ Series CS Series C200HX/HG/
HE
CVM1/CV
Series
CQM1H

Omron SYSMAC CS/CJ Series Specifications

General

Brand	Omron
Model	SYSMAC CS/CJ Series
Category	Controller
Language	English