Omron SYSMAC CS/CJ Series User Manual

330
PLC Comparison Charts Appendix A
Interrupts I/O interrupts Yes (Max 2 Interrupt
Input Units: 32 points,
plus 4 points for built-
in I/O on CJIM CPU
Units) (CJ1 CPU Units
do not support I/O
interrupts.)
Yes (Max. 4 or 2
Interrupt Input
Units: 32 points)
Yes (Max. 2
Interrupt Input
Units: 16
points)
Yes (Max. 4
Interrupt Input
Units: 32
points)
Yes (4 built into
CPU Bus Unit)
Scheduled interrupts Yes Yes Yes Yes Yes
One-shot timer inter-
rupts
No No No No Yes
Input interrupts in
counter mode
Yes (CJ1M CPU Units
only)
No No No Yes
High-speed counter
interrupts
Yes (CJ1M CPU Units
only)
No No No Yes
External interrupts Yes (CJ1 CPU Units
do not support exter-
nal interrupts.)
Yes No No No
From Communica-
tions Board
No Yes Yes No No
Power-ON interrupt No No No Yes No
Power-OFF interrupt Yes Yes No Yes No
Interrupt response
time
0.17 ms
Built-in I/O on CJ1M
CPU Units: ).12 ms
C200H Special I/
O Unit: 1 ms
CJ-series I/O:
0.1 ms
1 ms --- Approx. 0.1 ms
PLC Setup Area No user addresses
(setting possible only
from Programming
Device, including Pro-
gramming Console)
No user
addresses (set-
ting possible only
from Program-
ming Device,
including Pro-
gramming Con-
sole)
Fixed DM Area
allocation: DM
6600 to
DM 6655,
DM 6550 to
DM 6559.
Setting possi-
ble from Pro-
gramming
Console.
No user
addresses (set-
ting possible
only from Pro-
gramming
Device, includ-
ing partially
from Program-
ming Console)
Fixed DM Area
allocation: DM
6600 to
DM 6655. Set-
ting possible
from Program-
ming Console.
Item CJ Series CS Series C200HX/HG/
HE
CVM1/CV
Series
CQM1H

Omron SYSMAC CS/CJ Series Specifications

General

Brand	Omron
Model	SYSMAC CS/CJ Series
Category	Controller
Language	English