Onan CCK Series User Manual

24
INSTALLATION
semi-pneumatic tires and adjustable folding handles with hand grips.
READI-PULL STARTER. ,.. Refer to the separate section in this publi-
cation for installation, operation and main,..
tena:h~e of the Readi-Pull rope recoil starter. The starter may be
positioned
in various directions of rope pull as illustrated under MAIN-
TENANCE
AND REPAIR.
The air housing on vacuum-coole.<! units does no~permit the use of a
Readi-Pull starter. Vacuum,..codled units are all electrically cranked.
. .
RUNNING TIME METER
Don't Guess- . Know how many hour.s your plant runs, so that you can
change
oil and service the plant at proper intervals ..
This meter will be an investment rather than an expense. Simple to
connect. This meter runs only when the plant is operating.
PART NO. USED WITH PLANT
302-212
60 Cycle, 120
V,. A. C.
c.302-102 .
50 Cycie, 120 V. A .C.
304-99
Resistor - adding to either meter
above makes it suitable for 240V. use.
Meters listed above are 3-1/2 inch diameter,' and are for flush mount-
ing on panel; . fit into
2-29/32 inch -hole. For wall mounting, order sepa-
rately:
301-500 ~strumentlBox
o
i
RUNNING TIME METER
f
INSTfWMENT BOX -

Onan CCK Series Specifications

General

Brand	Onan
Model	CCK Series
Category	Portable Generator
Language	English