2-6
Fault History
To display any of the last five faults, press the FAULT
button on any GEN STATUS screen. Then press the
HIST button on the FAULT screen (Figure 2-5).
The FAULT HISTORY screen will display the last
Fault Number, a description of the Fault and the
hour in total genset running time when the fault oc-
curred. Press the double arrows [
] to toggle be-
tween the last 5 faults. If there are no faults, the
FAULT HISTORY screen will display No Stored
Faults.
Press [ BACK] to go back to GEN STATUS.
Engine Pre-Alarms
The PRE-ALARM status lamp will come on when
engine oil pressure or temperature approaches its
limit for engine shutdown. The Display will display
Low Oil Pressure or High Engine Temperature on
the PRE-ALARM screen (Figure 2-6).
Press [
BACK] to go back to GEN STATUS to moni-
tor the engine temperature or oil pressure.
Service the genset as required.
OR
From FAULT, Fig. 2-3
FIGURE 2-5. FAULT HISTORY
From FAULT, Fig. 2-3
OR
FIGURE 2-6. ENGINE PRE-ALARMS
Redistribution or publication of this document,
by any means, is strictly prohibited.
To Next Page
Loading...
Need help?
General
