Owon TAO3000 Series User Manual

9.Technical Specifications
125
Timeout Value
30 ns to 10 s
Data Bits
4 bit to 32 bit
Data Line Setting
H, L, X
CAN Trigger
(optional)
Signal Type
CAN_H, CAN_L, TX, RX
Trigger Condition
Start of Frame, Type of Frame, Identifier,
Data, ID & Data, End of Frame, Missing
Ack, Bit Stuffing Error
Baud Rate
Common, Custom
Sample Point
5% to 95%
Frame Type
Data, Remote, Error, Overload
General Technical Specifications
Display
Display Type
8" Colored LCD (Liquid Crystal Display)
Display Resolution
800 (Horizontal) × 600 (Vertical) Pixels
Display Colors
65536 colors, TFT screen
Output of the Probe Compensator
Output Voltage
(Typical)
About 3.3 V, with the Peak-to-Peak voltage ≥1 MΩ.
Frequency (Typical)
Square wave of 1 KHz
Power
Mains Voltage
100V – 240 VACRMS, 50/60 Hz, CAT Ⅱ
Power Consumption
＜15 W
Fuse
2 A, T class, 250 V
Battery (optional)
7.4V, 8000mAh
The battery can last approximately 5 hours (differ in
models) after a full recharge.
Environment
Temperature
Working temperature: 0 ℃ - 40 ℃
Storage temperature: -20 ℃ - 60 ℃
Relative Humidity
≤ 90%
Height
Operating: 3,000 m
Non-operating: 15,000 m
Cooling Method
Fan cooling
Mechanical Specifications
Dimension
270 mm × 191 mm × 48 mm (L*H*W)
Weight
Approx. 1.7 kg (without accessories)
Interval Period of Adjustment:
One year is recommended for the calibration interval period.

Owon TAO3000 Series Specifications

General

Brand	Owon
Model	TAO3000 Series
Category	Test Equipment
Language	English