Owon TAO3000 Series User Manual

4.Advanced User Guidebook
70
7) ADCB
Parameter
name
Meaning
Value
Comment
ADCB
ADC bit, ADC
resolution
4 bytes int
8-bit or 12-bit
8) CHAN
Parameter
name
Meaning
Value
Comment
CHAN
Number of
channels
4 bytes int
1 or 2
9) VOL2
Parameter
name
Meaning
Value
Comment
VOL2
Voltage division,
divided by 400 is
ADC resolution.
(When the source
mode is
Out1&Out2, it is
the second
channel voltage
division.)
4 bytes float
The value indicates
voltage (the unit is mV),
such as 200 mV.
2.Data
The data type is signed integer. You can determine the data type (char, short int or int)
based on the BYTE parameter. The valid range is determined by the ADCB parameter,
e.g. the valid range for 8-bit ADC is -127 to +127.
Update your Instrument Firmware
Use the side panel USB port to update your instrument firmware using a USB
memory device.
USB memory device requirements: Insert a USB memory device into the
USB port on the side panel. If the icon appears on the top right of the
screen, the USB memory device is installed successfully. If the USB memory
device cannot be detected, format the USB memory device according to the
methods in "USB disk Requirements" on P59.
Caution: Updating your instrument firmware is a sensitive operation, to
prevent damage to the instrument, do not power off the instrument or remove
the USB memory device during the update process.
To update your instrument firmware, do the following:

Owon TAO3000 Series Specifications

General

Brand	Owon
Model	TAO3000 Series
Category	Test Equipment
Language	English