Connection to TV- and Video devices
The device has different types of video/audio outputs with different signal types and
quality.
Video and audio signal in the best digital quality are provided at the HDMI port. Use
this port if your TV also has one. You can choose the resolutions 576i / 576p / 720p /
1080i and 1080p in the receiver menu. Choose the one that is recommended for your
TV. If your TV supports CEC Standard, you can operate the receiver with TV remote
control. TV manufacturer rarely use the name CEC, they use instead manufacturer-
specific names such as Anynet, Easylink and so on. The supplier of your TV should
have this information.
Cinch and SCART connector provides only composite video (FBAS) and audio
signals. Use this for devices with simple audio/video input, for example if you want to
install a video or DVD recorder. If this device has another connection plug, so you
can get corresponding adaptors in the specialized trade.
Connection to Hifi-System and PC
If your amplifier or Dolby-Surround-Decoder have an optical or electrical digital input,
connect an appropriate SPDIF port over a suitable cable to the digital input on your
amplifier or Dolby-Surround-System. You can enjoy Dolby-Digital-Surround-Sound –
AC3 in your Home cinema only over these ports. But it is necessary that the chosen
program supports this standard.
To update the receiver software you can transmit it via USB.
To Next Page
Loading...
General