This device with stand-by power consumption < 1 Watt meets the latest energy
guideline 2005/32/EG (European Directive). This new guideline also demands that
the device switches automatically to stand-by in 3 hours, if the program has not been
changed in this period. This is no technical disorder but a component of the new
guideline.
If you do not like this function, so you can deactivate it. (Power-saving mode „Off“)
But we recommend you to have this function activated to save power.
If power-saving mode is on, so the LED display turns in stand-by completely off. In
normal stand-by mode it shows current time. If the timer is programmed for a
recording, so the device does not go completely down and current time is showed in
stand-by darkened in the display.
Time settings
If you use the device in Germany, so you do not really need to change something in
this menu. You can make changes you need if you use the device somewhere else.
Time update will be carried out by data signals of TV programs if you activate the
menu item.
Audio / Video setup
The parameters of the following menu are already set in a way they are used mostly.
But you can also change them in a desired way.
To Next Page
Loading...
General