109
SQW0038
Picture Quality and colouring Settings
Setting the picture quality and size
Setting the compression rate of pictures ([Quality])
Recording mode:
Set the compression rate used for storing pictures.
→ [Rec] → [Quality]
Settings File format Description
[
]
JPEG
Gives priority to picture quality and saves pictures in JPEG file
format.
[
]
Saves pictures in JPEG file format using standard picture quality.
This setting is useful when you want to increase the number of
recordable pictures without changing the number of pixels.
[
]
RAW + JPEG
Saves pictures in JPEG file format in addition to the RAW file
format.
*
1
[ ]
[
] RAW
Saves pictures in the RAW file format.
*
2
*
1
If you delete a RAW file from the camera, the corresponding JPEG file is also deleted.
*
2
The picture size is fixed to the maximum recordable pixels for each image aspect ratio ([L]).
About RAW file
In RAW file format the data is saved without any picture processing by the camera. This
format delivers a higher picture quality than the JPEG format, but the amount of data
is greater. To play back and edit RAW file pictures, you must use this unit or dedicated
software.
You can perform advanced editing of RAW file pictures, such as correcting the White
Balance of pictures recorded previously, and save the pictures in file formats that can be
displayed on a PC.
• You can develop the RAW file pictures using [RAW Processing] in the [Playback] menu.
(→208)
• To develop and edit RAW file pictures on a PC, use the supplied DVD software
(Ichikawa Soft Laboratory’s “SILKYPIX Developer Studio”).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
