284
SQW0038
Connecting with other devices
Storing recorded still pictures and motion pictures on your PC
Copying still pictures and motion pictures
Preparations
• Install “PHOTOfunSTUDIO” on your computer before starting the copying procedure. (→283)
• Turn on the camera and computer.
1
Connect camera to computer
• Check the plug direction and insert it straight in. (If the cable is inserted in the wrong direction,
the plug could become deformed and cause faulty operation) Also, do not insert into the wrong
socket. Doing so may cause damage to this unit.
• Do not use any other USB connection cables except the supplied one or a genuine Panasonic
USB connection cable (DMW-USBC1: optional). Using cables other than the above may cause
a malfunction.
Align the marks, and insert.
[AV OUT/DIGITAL] socket
[Access] (sending data)
• Do not disconnect the USB connection cable
(supplied) while [Access] is displayed.
USB connection cable (supplied)
2
Use to select [PC] and press [MENU/SET]
• Setting the [USB Mode] to [PC] removes the need to make the setting each time the camera is
connected to the computer.
3
Use “PHOTOfunSTUDIO” to copy pictures to your computer
• For details on how to use “PHOTOfunSTUDIO”, see the “PHOTOfunSTUDIO” manual (PDF).
●
Do not delete or move copied files and folders using Windows Explorer or other browsers.
Otherwise, you will not be able to play back or edit the files using “PHOTOfunSTUDIO”.
■
For PTP mode
The camera can be connected to your computer even if [USB Mode] (→47) is set to
[PictBridge(PTP)].
• Only picture output can be performed.
• If you cannot connect to your PC in PTP mode, set [USB Mode] to [PC] and
reconnect.
• It may not be possible to import if there are 1,000 or more pictures on the card.
• Motion pictures or RAW pictures cannot be read.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
