288
SQW0038
Connecting with other devices
Printing
Printing multiple pictures
Multiple pictures are printed at one time.
1
Press to select [Multi Print] in step
3
(→287)
2
Use to select the item and press [MENU/SET]
• [Multi Select]: Scroll between pictures with , select pictures to print with the
[MENU/SET]. (Press [MENU/SET] again to release selection.)
Use to select [OK], and press [MENU/SET].
• [Select All]: Print all pictures.
• [Print Set (DPOF)]: Print pictures selected in [Print Set]. (→220)
• [Favorite]: Print pictures selected as [Favorite]. (→219)
3
Use to select [Print start] and press [MENU/SET]
(Print settings (→290))
• Select [Yes] if print confirmation screen is displayed.
●
The group pictures are displayed one by one instead of all pictures at the same time.
●
Turn off the camera before inserting or removing memory cards.
●
Disconnect USB connection cable (supplied) after printing.
●
Use a sufficiently charged battery or an AC adaptor (optional) and DC coupler (optional). When
the battery starts to run out during connection, a warning beep sounds. Cancel printing and
disconnect USB connection cable.
●
An orange “●” displayed during printing indicates an error message.
●
Print may be divided into several pictures if printing a large amount of pictures.
(Remaining sheets display may differ from the number of pictures set for printing.)
Not available in the following cases:
●
Motion pictures cannot be printed.
●
Still pictures recorded in a RAW file cannot be printed. (The still pictures recorded in JPEG file
format at the same time as the RAW file can be printed.)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
