277
SQW0038
Connecting with other devices
Viewing on TV screen
■
To connect with an HDMI micro cable
●
Check the [HDMI Mode]. (→48)
●
To play back 24p motion pictures, set [HDMI Mode] to [AUTO]. Otherwise, the picture is not
output at 24 frames per second.
●
Bars may appear at the sides or at the top and bottom of the screen, depending on the aspect
ratio setting.
●
Cables that do not comply with HDMI standards will not work.
●
When an HDMI micro cable is connected, pictures are not displayed on the screen.
●
HDMI output will be cancelled if a USB connection cable (supplied) is connected simultaneously.
●
When the AV cable (optional) and HDMI micro cable are connected at the same time, no picture
is output from the AV cable.
●
Pictures may be momentarily distorted immediately after commencing playback or pausing on
certain televisions.
●
Audio output is stereo.
●
Read the operating instructions for the TV.
■
To connect with an AV cable (optional)
●
Check the [TV Aspect]. (→47)
●
Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
●
You can play back pictures on TVs in other countries (regions) which use the NTSC or PAL
system. You can find [Video Out] setting in [TV Connection] from the [Setup] menu.
●
Pictures rotated to portrait may be blurred slightly.
●
Change picture mode settings on TV if aspect ratios are not displayed correctly on widescreen
or high-definition televisions.
●
The viewfinder display cannot be used.
●
Read the operating instructions for the TV.
The recorded pictures can be played back on a TV with an SD
Memory Card slot
●
Proper playback (aspect ratio) will be dependent on the TV used for viewing.
●
The file format of the motion pictures that can be played back differs depending on the
TV model.
●
You may not be able to play back panorama pictures. Also you cannot perform
automatic scrolling playback of panorama pictures.
●
For cards compatible with playback, refer to the operating instructions of the TV.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
