228
SQW0038
Wi-Fi
Operating the camera by connecting it to a
smartphone
You can remotely operate the camera using a smartphone.
The “Panasonic Image App” (hereafter “Image App”) must be installed on your
smartphone.
Installing the smartphone/tablet app “Panasonic Image App”
The “Image App” is an application provided by Panasonic that allows your smartphone to
perform the following operations of a Wi-Fi-compatible LUMIX.
For Android™ apps For iOS apps
Supported OS
Android 2.3.3 or later
*
iOS 6.0 or later
(iPhone 3GS is not supported.)
Installation
procedure
Connect your Android device to a
network
Select “Google Play
TM
Store”
Enter “Panasonic Image App” or
“LUMIX” to search for the app
Select “Panasonic Image App” and
install it
• The icon will be added to
the menu.
Connect the iOS device to the
network
Select “App Store
SM
”
Enter “Panasonic Image App” or
“LUMIX” to search for the app
Select “Panasonic Image App” and
install it
• The icon will be added to
the menu.
*
To connect this unit with [Wi-Fi Direct], Android OS 4.0 or above is required and the device must be
compatible with Wi-Fi Direct™.
• Use the latest version.
• Supported OS versions as of September 2014. Supported OS versions may be
changed without prior notice.
• Some of the screens and information provided in this document may be different
depending on the supported operating system and “Image App” version.
• The service may not be able to be used properly depending on the type of
smartphone being used.
• For details about the operating procedure, etc., refer to [Help] in the “Image App”
menu.
• For the latest information on the “Image App”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.)
• When downloading the app on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.