Pantum P3010 SERIES User Manual

9.1.5.Restore Factory Settings
“Recover factor settings” is used to recover the default settings of printer.
The printer will restart itself automatically after recovering factory settings.
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "1.System Setting" option.
3) Press direction key "▲" or "▼" to select the "5.Restore Set" option and press "OK".
Note：
• Factory settings of network printer can be recovered via embedded
Web server (please refer to Chapter 6.2.4).
• As for printers with LED control panel, press the power key to turn printer
on and then press the Cancel/Continue key for more than 2s untilthe two green
status lights on the panel start to blink at the same time. Then, release the key
and wait for factory settings of the printer to recover. The printer will restart itself
automatically after finishing recovering factory settings.
9.1.6.Auto shut-off setting
“
Auto shut-off setting” to set off condition and off delay of printer.
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "1.System Setting" option.
3)
Press direction key “▲” or “▼” to select options of “6.Auto off set”, press “OK” to set off
condition and off delay.
59

Pantum P3010 SERIES Specifications

General

Brand	Pantum
Model	P3010 SERIES
Category	Printer
Language	English