01-07-2002
Entering a new destination
The last town entered is displayed.
To enter the name of another town, select each letter using
the direction arrows then confirm ("VAL" button) for each
letter.
If an error is made, the "Correct" function enables the last
letter entered to be deleted.
As the name is entered, the "List" function indicates the
number of towns beginning with the same letters. If the list
contains less than 5 names, these are displayed automat-
ically. Select a town then confirm ("VAL" button).
The "Change" function enables the town entered to be
completely cleared.
When the complete name of the town is displayed, select
the "Validate" function then press the "VAL" button.
Note: following confirmation of a letter, only those letters
which could make up an existing name appear.
Enter the name of the street. Select the "Validate" function
then press the "VAL" button.
Note: the guidance can be activated from the time the
town is entered, without the name of a street or a number.
To do this, select the "Town centre" function.
YOUR 406 COUPE IN DETAIL
78
Enter the street number. Select the "Validate" function
then press the "VAL" button.
Note: the guidance can be activated as soon as the town
and street are entered, without a number. To do this, select
the "Validate" function.
To Next Page
Loading...
Need help?
General
