THE WIPER STALK
Windscreen wipers
2 Fast wipe (heavy rain).
1. Normal wipe (moderate
rain).
AUTO Automatic wipe.
0 .Off.
. Single wipe (press the stalk
downwards).
Operation
In position 1 or 2, when the vehicle
stops, the windscreen wiper changes
to a lower wiping speed, then
resumes its initial speed when the
vehicle starts again.
When the ignition has been
switched off for more than a
minute with the stalk in the AUTO
position, it is necesary to reacti-
vate this function. To do this, move
the stalk to any position, then move it
back to the AUTO position.
YOUR 406 COUPE IN DETAIL
101
Do not cover the rain
detector located on the
windscreen behind the
interior mirror.
When using an automatic car
wash, switch off the ignition or
check that the wiper stalk is not in
the automatic position.
In winter, it is advisable to wait for
the windscreen to completely
clear of ice before operating the
automatic wipe.
Windscreen and headlamp wash
Pull the windscreen wiper stalk
towards you.
The windscreen wash then the wind-
screen wipers operate for a fixed
period. The windscreen wash and
headlamp wash operate simultane-
ously for a few seconds, only if the
dipped beam or main beam head-
lamps are on.
Automatic wipe
In the AUTO position, the wiper
operates automatically and adjusts
its speed to the intensity of the
rainfall.
Operating check
Activation
Activation of the function is accom-
panied by the message "Automatic
wiper activated" on the multi–func-
tion display.
In the event of malfunction in the
AUTO position, the windscreen
wiper will operate in down-grade
mode.
Have the system checked by a
PEUGEOT dealer.
01-07-2002
To Next Page
Loading...
Need help?
General
