PEUGEOT 406 User Manual

6 - Head restraint height and
angle adjustment
Adjustment is correct when the
top of the head restraint is level
with the top of the head.
To raise the head restraint, pull it
upwards.
To lower the head restraint, it is
necessary to push simultaneously:
– the button located on the left
guide on top of the seat back,
– the head restraint downwards.
The head restraint has a frame
with notches which prevent it
from dropping down (safety
device in case of impact).
To remove the head restraint,
press the tab.
7 - Lumbar adjustment
To obtain better back support,
turn the knob.
Passenger seat
To gain access to the rear seats,
there are two ways to tilt the seat
back:
– pull the handle at the top right of
the seat, or
– lift the handle at the bottom left of
the seat.
91
YOUR 406 COUPE IN DETAIL
SEATS
Manual adjustment
of the front seats
1 - Forwards-backwards adjust-
ment
Lift the lever and slide the seat
forwards or backwards.
2 - Adjusting the seat cushion
angle
Lift the lever to set the best angle.
3 - Adjusting the driver's seat
height
Pull the telescopic handle for-
wards and pivot it up or down.
4 - Adjusting the seat back angle
Turn the knob to obtain the best
angle.
5 - Tilting the seat back
To gain access to the rear seats,
pull the handle, tilt the seat back
as much as possible, and move
the seat forwards. On reposition-
ing, the seat will resume its origi-
nal settings.
Note: never reposition the seat
using the forwards-backwards
adjustment control.
Never drive with the
head restraints removed;
they must be in place
and correctly adjusted.
01-07-2002

PEUGEOT 406 Specifications

General

Brand	PEUGEOT
Model	406
Category	Automobile
Language	English