PEUGEOT Kisbee Workshop Manual

SERVICE OPERATIONS
32
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Checking the clutch linings
- Using the depth calliper, measure the
thickness of the clutch linings.
Mini. thickness 2 mm.
- Make sure surface of the plates in contact
with the belt does not show any cracks or
signs of abnormal wear.
Replacing the clutch lining assembly
- Compress the clutch drive pulley and driven
pulley assembly with the tool P/N 752127
clamped in the jaws of a vice.
- Remove nut (1) using spanner P/N 756725.
- Slacken tool P/N 752127.
- Remove the clutch linings (2), the upper
centring sleeve (3), the spring (4), and the
lower centring sleeve (5).
- Remove the 3 pins (6) from the variable
speed drive seat.
- Separate the fixed (7) and rotating
(8) flanges.
- Make sure surface of the plates in contact
with the belt does not show any cracks or
signs of abnormal wear.
756725
1
752127
3
2
4
5
8
7
6

PEUGEOT Kisbee Specifications

General

Displacement	49.9 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Seat Height	780 mm
Front Tire	110/70-12
Rear Tire	110/70-12
Width	700 mm
Engine Type	4-stroke, single-cylinder
Transmission	CVT
Weight	85 kg
Power	2.6 kW