PEUGEOT Kisbee Workshop Manual

ELECTRICITY
55
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Removal of the fuel gauge
- Remove the rear storage compartment.
See: Procedure 1. page 20.
- Disconnect the fuel gauge (1).
- Remove the fuel gauge (4 screw) (when
dismantling notice in which direction it is so
that you will replace it in its initial position
when reassembling).
- Remove the rubber gasket.
When re-installing, use a new gasket.
Check:
A. Full fuel tank: 8 :
±20%
.
B. Empty fuel tank: 95 :
±20%
.
Removal of the high tension coil
- Remove the rear storage compartment.
See: Procedure 1. page 20.
- Disconnect the suppressor (1).
- Disconnect and remove the high voltage
coil (2) (1 screw).
1
Ω
A
B
1
2

PEUGEOT Kisbee Specifications

General

Displacement	49.9 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Seat Height	780 mm
Front Tire	110/70-12
Rear Tire	110/70-12
Width	700 mm
Engine Type	4-stroke, single-cylinder
Transmission	CVT
Weight	85 kg
Power	2.6 kW