PEUGEOT Kisbee Workshop Manual

SERVICE OPERATIONS
41
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Draining the front fork
- Remove the front upper shield panel.
See: Procedure 6. page 23.
- Turn the handlebars to the right to reveal
the fork nut (1) in the hold in the
mudguard.
- Before, loosen the fork tube caps (1).
- Repeat this operation by turning the
handlebars to the left.
- Suspend or immobilize the machine
securely.
- Remove the caliper 2 fixing bolts.
- Remove the front wheel.
- Removal of the front mudguard (4 screw).
- Unscrew and remove the 2 upper
screws (2) from the fork Tee.
- Unscrew the 2 lower screws (3) from the
fork Tee.
- Remove the fork stanchions.
- Remove the fork tube cap (1).
- Remove the spring (4).
1
3
2
1
4

PEUGEOT Kisbee Specifications

General

Displacement	49.9 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Seat Height	780 mm
Front Tire	110/70-12
Rear Tire	110/70-12
Width	700 mm
Engine Type	4-stroke, single-cylinder
Transmission	CVT
Weight	85 kg
Power	2.6 kW