PEUGEOT Kisbee Workshop Manual

POWER UNIT
66
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
- Hold the magnetic wheel to unscrew the
2 fastening screws from the camshaft
pinion.
- Remove the camshaft gear (7).
- Tie a wire to the timing chain in order to
prevent it from falling into the crankcase.
- Loosen the 2 washers screws (8).
- Gradually loosen in a crosswise order the 4
nuts which secure the cylinder head (9).
- Remove the cylinder head.
Removal of the camshaft and/or rockers
- Remove the pins from the rockers using a
5 mm screw.
- Remove the inlet (1) and exhaust (2)
rockers.
- Remove the stopper plate (3).
Tightening torque: 15 Nm.
- Remove the camshaft (4).
7
8
9
9
3
1
2
4

PEUGEOT Kisbee Specifications

General

Displacement	49.9 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Seat Height	780 mm
Front Tire	110/70-12
Rear Tire	110/70-12
Width	700 mm
Engine Type	4-stroke, single-cylinder
Transmission	CVT
Weight	85 kg
Power	2.6 kW