8 - 5
Installation and commissioning
Switch off the machine!
Danger of injury due to
unintentional starting of the
machine!
● Screw on tilt lock 1, provided in the ac-
cessories, using screw 2.
Do not operate the machine
without tilt lock 1!
Danger of crushing between
sewing head and table top!
8.01.07 Fitting the tilt lock
8.01.08 Fitting the reel stand
● Fit the reel stand as shown in Fig. 8 - 08.
● Afterwards insert the stand in the hole in
the table top and secure it with nuts pro-
vided.
Fig. 8 - 08
Table top mounting and circuit diagrams
(see Chapter 11)
Fig. 8 - 07
1
2