Pfaff 1295 User Manual

Care and maintenance
10 - 4
Switch off the machine!
Danger of injury due to
unintentional starting of the
machine!
● Loosen screw 1 and open cover 2 on the
rear side of the machine.
● Apply a little grease at nipple 3 at least
once a year.
● Close cover 2 and tighten screw 1.
Only use lithium grease with a
dripping point of 185°C and a
roll-penetration of 22 to 25 mm
at 25°C.
We recommend PFAFF sewing
machine grease, part
No. 280-1-120247.
10.04 Oiling the needle-head parts
Switch off the machine!
Danger of injury due to
unintentional starting of the
machine!
● Remove the faceplate.
● Oil all moving parts and bearing points
(see arrows) twice a week.
● Refit the faceplate.
Only use oil with a medium
viscosity of 22.0 mm²/s at 40°
C and a density of 0.865 g/cm³
at 15°C!
We recommend PFAFF sewing-
machine oil, part
No. 280-1-120144.
Fig. 10 - 04
Fig. 10 - 05
10.05 Lubricating the top-feed drive eccentric
2
3
1

Pfaff 1295 Specifications

General

Brand	Pfaff
Model	1295
Category	Sewing Machine
Language	English