36
104 73 15-26
Settings
26. Stitch length balance
Check
1. Both columns of the buttonhole shall be of the same density.
2. The mending stitch shall look according to illustration.
On AMBITION 1.0-1.5 Use service program menu 4 press key nr. 1 and presser foot #2A.
On AMBITION ESSENTIAL Press
button to come to mode and use pattern No 15
3. The Decorative stitch shall look according to illustration.
On AMBITION 1.0-1.5 Use service program menu 4 nr 3 and Presser foot #1A.
On AMBITION ESSENTIAL Press
button to come to mode and use pattern No 7 .
Fine adjustment
1. On AMBITION 1.0-1.5 In service program menu 4 press key nr. 1 - Mending stitch.
On AMBITION ESSENTIAL Press
button to come to mode and use pattern No 15
2. Turn screw (c) until the machine sews mending stitch according to illustration.
- To adjust the mending stitch in the b- direction, turn the screw (c) to the right (b).
- To adjust the mending stitch in the a- direction, turn the screw (c) to the left (a).
To do this adjustment the free arm cover needs to be removed!
b
a
2
c
a b
To Next Page
Loading...
Need help?
General
