PIAGGIO beverly 500 User Manual

01_17
01_18
01_19
Identification (01_17, 01_18, 01_19)
The identification numbers consist of a prefix stamped on the chassis «B» covered by
port «A» and on the engine «C», followed by a number.
These numbers must always be mentioned on spare parts requests.
To read the chassis number, remove the relevant port «A» in the helmet compartment
placed under the mat.
The chassis number stamped on the vehicle should be checked against that reported
onto the vehicle's documents.
CAUTION
BE REMINDED THAT ALTERING IDENTIFICATION REGISTRATION NUMBERS
CAN LEAD TO SERIOUS PENAL SANCTIONS (IMPOUNDING OF THE VEHICLE,
ETC.).
17
1 Vehicle

PIAGGIO beverly 500 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	493 cc
Fuel System	Electronic fuel injection
Front Tire	110/70 - 16
Length	2, 150 mm
Width	780 mm
Seat Height	790 mm
Maximum Torque	43 Nm @ 5, 500 rpm
Cooling System	Liquid cooled
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Single disc
Rear Brake	240 mm disc
ABS	No
Rear Suspension	Dual hydraulic shock absorbers