PIAGGIO beverly 500 User Manual

Scheduled maintenance table
Adequate maintenance is fundamental to ensuring long-lasting, optimum operation
and performance of your scooter.
For this purpose, PIAGGIO has developed a series of checks and maintenance op-
erations (against payment) that are contained in the summary table shown on the next
page. Any minor faults should be reported without delay to a PIAGGIO Dealer or
Authorised Service Centre without waiting until the next scheduled service.
Carrying out scheduled services on time is necessary to ensure your warranty remains
valid. For all other information concerning Warranty procedures and "Scheduled Main-
tenance", please refer to the "Warranty Booklet".
EVERY 2 YEARS
Coolant - change
Brake fluid - change
AFTER 1,000 KM
Safety locks - check
Throttle lever - adjustment
Engine oil - change
Electrical system and battery - check
Coolant level - check
Brake fluid level - check
Engine oil - replacement
Brake pads - check condition and wear
76
6 Programmed maintenance

PIAGGIO beverly 500 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	493 cc
Fuel System	Electronic fuel injection
Front Tire	110/70 - 16
Length	2, 150 mm
Width	780 mm
Seat Height	790 mm
Maximum Torque	43 Nm @ 5, 500 rpm
Cooling System	Liquid cooled
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Single disc
Rear Brake	240 mm disc
ABS	No
Rear Suspension	Dual hydraulic shock absorbers