PIAGGIO beverly 500 User Manual

Electric characteristic
Battery
12V - 12 Ah
Use of a new battery
Ensure that the terminals are connected correctly and check the voltage.
CAUTION
DO NOT REVERSE THE POLARITY: RISK OF SHORT CIRCUIT AND DAMAGE
TO THE ELECTRICAL SYSTEM.
Checking the electrolyte level
The electrolyte level, which should be checked regularly, must always be at the max-
imum level. To top it up to this level, use only distilled water.
Should it become necessary to top up the battery with water too frequently, check the
scooter's electrical system because the battery is being overloaded, causing it to lose
power quickly.
Long periods of inactivity
Battery performance will decrease if the vehicle is not used for a long time. This is the
result of the natural phenomenon of battery discharging plus residual absorption by
vehicle components with constant power consumption. Poor battery performance may
also be due to environmental conditions and the cleanness of the poles. In order to
avoid difficult starts and/or irreversible damage to the battery, follow any of these
steps:
47
3 Maintenance

PIAGGIO beverly 500 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	493 cc
Fuel System	Electronic fuel injection
Front Tire	110/70 - 16
Length	2, 150 mm
Width	780 mm
Seat Height	790 mm
Maximum Torque	43 Nm @ 5, 500 rpm
Cooling System	Liquid cooled
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Single disc
Rear Brake	240 mm disc
ABS	No
Rear Suspension	Dual hydraulic shock absorbers