Air filter
•
Remove the two mounting screws
shown in the figure.
UPON REASSEMBLY, THE SHORTER SCREW MUST BE
INSERTED INTO THE REAR SIDE.
•
Remove the blow-by and condensate
exhaust pipe cap.
•
Loosen the intake hose screw band.
•
Loosen the blow-by pipe band.
•
Pull out the complete air filter box.
Rear mudguard
•
Remove the air filter box.
•
Disconnect the rear brake pipe retain
strap.
•
Remove the two retainers shown in the
figure.
•
Remove the mudguard from the scoot-
er right side.
Chassis Beverly 500 i.e.
CHAS - 322
To Next Page
Loading...
Need help?
General