This section is devoted to operations that can be carried out on the suspension.
Front
Removing the front wheel
- Remove the fixing nut from the wheel axle on the
left side of the vehicle.
- Loosen the two screws fixing the wheel axle
clamp and remove the clamp.
Front wheel hub overhaul
Check that the wheel bearings do not show signs
of wear.
If you have to replace the wheel bearings, proceed
as follows:
- Remove the two bearings on the brake disc side
using pliers 14 and the special bell 9.
- Remove the internal spacer.
Suspensions X8 400 Euro 3
SUSP - 290
To Next Page
Loading...
Need help?
General