EasyManuals Logo
Home>Polaris>Offroad Vehicle>RZR 900 2018

Polaris RZR 900 2018 Service Manual

Polaris RZR 900 2018
611 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
2
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
2.47
10.Add the recommended amount of lubricant through
the fill plug hole. Maintain the lubricant level at the
bottom of the fill plug hole when filling the
transmission. Do not overfill.
FLUID CAPACITY
Recommended Transmission Lubricant:
AGL (PN 2878068) (Quart)
Capacity (without Turf mode): 44 oz. (1300 ml)
Capacity (with Turf mode): 40.5 oz. (1200 ml)
11. Reinstall the fill plug and torque to specification.
TORQUE
Transmission Fill / Drain Plug Torque:
14 ft-lbs (19 Nm)
12.Check for leaks. Dispose of used lubricant properly.
FRONT GEARCASE LUBRICATION
NOTICE
It is important to follow the front gearcase maintenance
intervals described in the Periodic Maintenance Chart.
Regular fluid level inspections should be performed as
well.
The front gearcase fluid level should be checked and
changed in accordance with the maintenance schedule.
Be sure vehicle is positioned on a level surface when
checking or changing the fluid.
Check vent hose to be sure it is routed properly and
unobstructed.
Front Gearcase Fluid Level Check
The fill plug is located on the bottom right side of the front
gearcase. Access the fill plug through the right front
wheel well. Maintain fluid level even with the bottom of
the fill plug hole.
1. Position vehicle on a level surface.
2. Remove the fill plug
q
and check the fluid level.
3. If fluid level is not even with the bottom threads, add
the recommended fluid as needed. Do not overfill.
4. Reinstall the fill plug and torque to specification.
TORQUE
Front Gearcase Fill / Drain Plug Torque:
10 ft-lbs (14 Nm)
Front Gearcase Fluid Change:
The drain plug is located on the bottom of the front
gearcase. Access the drain plug through the access
hole in the frame underneath the front gearcase.
5. Remove the fill plug.
6. Place a drain pan under the front gearcase drain
plug.
7. Remove the drain plug
w
and allow fluid to drain
completely.
8. Clean the drain plug magnetic surface.
9. Reinstall the drain plug and torque to specification.
MAINTENANCE

Table of Contents

Other manuals for Polaris RZR 900 2018

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris RZR 900 2018 and is the answer not in the manual?

Polaris RZR 900 2018 Specifications

General IconGeneral
BrandPolaris
ModelRZR 900 2018
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals