Polaris RZR XP 1000 2018 User Manual

4.10
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
EVAP CONDITIONS AND SYMPTOMS
The following conditions and symptoms should be taken into consideration when working on a vehicle with an EVAP
System:
• If the system is purging at idle, it will cause a rough idle.
• Cracks in an EVAP hose or canister may cause
– Fuel odor
– Trouble codes being set
• A loose fuel cap will NOT trigger a trouble code but may cause a fuel odor
•
Excessive hydrocarbon emissions may be caused by any of the following:
• An ignition misfire
• Improper ignition timing
• Excessively lean or rich air/fuel mixture
• Low Compression
• Worn valves or guides
• Worn cylinder or piston rings
• Vacuum leaks
• Dirty fuel injector
• Defective sensor or damaged sensor wiring
Excessive carbon monoxide emissions may be caused by any of the following:
• Rich air/fuel mixture
• Dirty air filter
• Leaking fuel injectors
• Fuel pressure too high/bad regulator
FUEL SYSTEM

Polaris RZR XP 1000 2018 Specifications

General

Brand	Polaris
Model	RZR XP 1000 2018
Category	Automobile
Language	English