4.54
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
Reprogramming (Reflash) Procedure:
If you are not familiar with the reprogramming process,
review the “Reprogramming (Reflash) Tips” before you
begin. Follow the on-screen instructions as you progress
through the steps. If you encounter a problem, always
check the On-Line help for current tips and information.
1. Verify the most current update has been downloaded
and loaded into Digital Wrench®. Digital Wrench
Software Version and Update ID, page 4.49
2. Connect SmartLink Module cables to PC and
vehicle.
3. Open the Digital Wrench® program.
4. Select the model year, product line and vehicle
description by selecting the “Change Vehicle Type”
icon.
5. Select the “Special Tests” icon.
6. Select “Engine Controller Reprogramming”.
7. Select the file you want to load into the ECU then
click the “Continue” icon to proceed to the Integrity
Check and obtain a Request Code.
8. Copy (CTRL +C) the Request Code that will be
required on the dealer website in the next step. DO
NOT CLOSE Digital Wrench® or the Request Code
will be invalid. NOTE: All characters are letters;
there are no numbers in a request code.
NOTE
Request Codes and Authorization Keys must be
entered EXACTLY as they appear on the screen.
9. Go to www.polarisdealers.com and click on “ReFlash
Authorization” from the “Service and Warranty” drop-
down menu.
FUEL SYSTEM
To Next Page
Loading...
Need help?
General
