5.32
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
12.Press the shaft and bearing out of the outer sheave
using an arbor press.
13.Inspect the bearing
f
for wear. Spin the bearing, if
the bearing does not spin smoothly, replace it. To
replace the bearing, remove the snap ring
g
from the
end of the shaft and press the bearing off the shaft.
14.Inspect the cam (helix) assembly bushing
h
for wear.
If the bushing is worn or the shaft does not fit snug
into the bushing, replace the cam (helix) assembly.
15.Inspect the sheaves for excessive wear or damage.
DRIVEN CLUTCH BUSHING SERVICE
NOTE
Special Tools Required for this service
Special Tools
PART # TOOL DESCRIPTION
2201379
Clutch Bushing Tool Kit (see breakdown
below)
2870386 Piston Pin Puller
2871226
Clutch Bushing Replacement Tool Kit
(see breakdown below)
Clutch Bushing Tool Kit - 2201379
ITEM
PART
#
TOOL DESCRIPTION
q
51320-
27
Puller Tool
r
51325-
01
Puller Nut
y
51320-
29
Main Adapter
u
51320-
28
Bushing Removal Tool
PVT SYSTEM
To Next Page
Loading...
Need help?
General
