2.26
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
BEADLOCK RIMS (DESERT EDITION)
The RZR XP Desert Edition model comes with Walker
Evans™ beadlock rims. The beadlock does not come set
up from factory, but may be changed to use the beadlock
feature.
To make the beadlock rim functional:
1. Deflate the tire.
2. Remove the beadlock screws and beadlock ring.
3. Dismount the tire on the side with the beadlock holes.
4. Place the beadlock ring so the tire is sandwiched
between the rim and the ring making sure the valve
stem is aligned with the slot in the ring.
5. Install bolts and thread them to 24 in-lbs (3 Nm).
6. Tighten in a criss-cross pattern to 7 ft-lbs (10 Nm).
TORQUE
Beadlock Screws:
Step 1: 24 in-lbs (3 Nm)Step 2: 7 ft-lbs (10 Nm)
NOTE
Beadlock bolts should be checked and retorqued every
300 miles (450 km).
7. Seat bead and inflate to 16 psi.
MAINTENANCE
To Next Page
Loading...
Need help?
General
