Polaris RZR XP4 1000 2016 User Manual

6
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
6.5
3. If adjustment is required, loosen the lower jam nut
r
and pull the cable out of the mount
e
to move the
upper jam nut
t
.
4. Adjust the shift cable so there is the same amount of
cable travel when shifting slightly past HIGH gear
and PARK.
5. Thread the upper or lower jam nut as required to
obtain proper cable adjustment.
NOTE
This procedure may require a few attempts to obtain
the proper adjustment.
6. Once the proper adjustment is obtained, place the
shift cable and upper jam nut into the mount. Tighten
the lower jam nut against the mount.
7. Start engine and shift through all gears to ensure the
shift cable is properly adjusted. If transmission still
ratchets after cable adjustment, the transmission will
require service.
TRANSMISSION

Polaris RZR XP4 1000 2016 Specifications

General

Brand	Polaris
Model	RZR XP4 1000 2016
Category	Offroad Vehicle
Language	English