BODY/STEERING/SUSPENSION
4.11
Front Bumper Mounting
Bolt Torque:
103 in.lbs. (12 Nm)
2. There are three (3) mounting positions for the
front and rear cab to the frame. The front cab is
mounted on positions 1 and 2. The rear cab is
mounted on position 3.
1
2
3
3. Install the front cab and rear cab to the frame and
tighten the mounting bolts to specification.
REMOVE BODY PANELS
Rear Cab
Front Cab
Cab Mounting Bolt Torque:
103 in.lbs. (12 Nm)
4. The front cab mounts to the front bracket of the
frame.
SPORTSMAN HANDLEBAR
ASSEMBL
Y
UPPER POD ASSEMBLY
LOWER POD ASSEMBLY
HANDLEBAR
PROTECTIVE
PLATE
CLAMPS
WASHER
NUT
BOLTS
Brake Lever
Right Hand
Control
Handlebar
Grip
1. Install the lower pod assembly.
2. The handlebar assembly includes the right and left
side brake levers, the throttle control and the left
side control switch. Install these items loosely on
the handle bar before mounting. Avoid pulling or
bending wires and brake cable.
Start Switch
Engine Stop Switch
Clamps
Lower Pod Assembly
Enfocus Software - Customer Support
To Next Page
Loading...
Need help?
General
