▪ Select No, End Session.
If you keep content, the content session continues.
Cameras
Camera controls are available in and out of calls.
You can control cameras, depending upon the camera type, in the following ways:
▪ Adjust an in-room camera
▪ Turn camera tracking on or off
Adjust an In-Room Camera
To enhance the view of meeting participants, make adjustments to the in-room camera.
If camera tracking is on, camera control is unavailable. Turn tracking off to access camera controls.
With the Studio X50 and Studio X30 systems, you can’t pan or tilt the camera if it’s zoomed all the way
out.
Procedure
1. Select Camera .
2. On the Camera Control screen, select Main from the drop-down menu.
3. Press + to zoom in or - to zoom out. Press the arrows to tilt up and down or to pan left to right.
4. To exit the control screen, select Back .
Adjust a Far-Site Camera
To enhance your view of the other meeting participants during a call, you can adjust the far-site camera.
If camera tracking is on, camera control is unavailable. Turn tracking off to access camera controls.
Note: Contact your administrator for help setting up this feature.
Procedure
1. Select Camera .
2. On the Camera Control screen, select Main (Far) from the drop-down menu.
3. Press + to zoom in or - to zoom out. Press the arrows to tilt up and down or to pan left to right.
4. To exit the control screen, select Back .
Turn Your Camera On or Off
You can turn your camera on to show local video or turn your camera off to hide your local video.
Procedure
1. Out of a call, select Menu .
2. Select On or Off to show or hide your video.
Controlling the Paired System in Poly Video Mode
18
To Next Page
Loading...
Need help?
General
