Basic Poly Studio LED Indicators
The Poly Studio device provides an LED bar above the camera to help you understand its behaviors.
Basic Poly Studio LED Indicators and Status
Indicator Position Status
Chasing white All while alternating Boot initialization in progress
Blinking blue Two in the middle Bluetooth in discovery
Solid blue for three seconds Two in the middle Bluetooth paired
Solid amber Two in the middle
Standing by
The privacy cover is open, and the camera
is in sleep mode with no active video
output
Blinking green or white All Incoming call
Solid green or amber Two in the middle Outgoing call
Solid green or white One or two (when in the middle), indicating
the tracked speaker or the direction of the
camera
Working
The lights are green with supported
applications in the following cases:
• Tracking people in group framing and
speaker tracking mode
• Indicating the direction of the camera
that you customize in pan-tilt-zoom
(PTZ) mode
Solid white for three seconds Two in the middle Saving a preset
Solid red All Muted microphone
Blinking red Two in the middle On hold
Poly Studio Remote Control Features
The Poly Studio USB video bar provides a low-energy Bluetooth remote control, which automatically pairs with the device
when you turn it on for the first time.
By default, Poly Studio enables the tracking function, which provides a hands-free experience except for basic buttons like
volume, mute, answer, and hang-up.
The remote control sleeps if it’s inactive for 30 seconds. Press any key or move it to wake it up.
7
To Next Page
Loading...
Need help?
General
