Monthly Task Instruction
frame. you seal the bike frame at least once a month, see "Seal Bike
Frame Procedure" below
Clean and apply silicone lub-
ricant to the handlebar and
seat assembly posts.
Remove the handlebar and seat posts from the frame. Clean
and apply a thin film of the 3-IN-ONE SILICONE lubricant
onto the handlebar and seat posts. Do not apply lubricant to
the handlebar or seat forward/back sliders. Reinstall the
handlebar and seat assembly posts onto the frame.
Seal Bike Frame Procedure
1. Wipe the bike frame using a clean lint-free cloth dampened with 30 parts water to 1 part
non-abrasive detergent.
2. Rinse the bike frame using a clean lint-free cloth and dampened with water only. Dry
completely with another clean lint-free cloth.
3. Seal the bike frame using wax or a polish to repel sweat and liquids. For best results,
apply the wax or polish per manufacturer’s instructions.
67
To Next Page
Loading...
Need help?
General
