NB-IoT Module Series
BC95 AT Commands Manual
BC95_AT_Commands_Manual Confidential / Released 38 / 58
Parameter
Example
AT+NSMI=1
OK
AT+NSMI?
+NSMI:1
OK
4.5. AT+NQMGR Neul Query Messages Received
This command queries the status of the downstream messages received from the CDP server. Refer to
Chapter 6 for possible <err> values.
AT+NSMI Neul Sent Message Indications
Set Command
AT+NSMI=<indications>
Response
OK
+CME ERROR: <err>
Response
+NSMI:<indications>
OK
<indications> 0 No indications, the default setting
1 Indications will be sent
<status> SENT
DISCARDED
AT+NQMGR Neul Query Messages Received
Response
BUFFERED=<buffered>,
RECEIVED=<received>,
DROPPED=<dropped>
OK
+CME ERROR: <err>
To Next Page
Loading...
Need help?
General
