Quectel BC95 User Manual

NB-IoT Module Series
BC95 AT Commands Manual
BC95_AT_Commands_Manual Confidential / Released 49 / 58
Parameter
Neul Hi2110 Implementation
 Only bands 5, 8 & 20 are supported initially.
 AT+NBAND=? does not return the list of supported bands.
4.18. AT+NLOGLEVEL Set Debug Logging Level
This command sets the logging level. It can take one of the following values. The default logging level is
NONE. And the value is persistent across reboots.
AT+NBAND Set Supported Bands
Set Command
AT+NBAND=n[,n[,n[…]]]
Response
OK
+CME ERROR: <err>
Read Command
AT+NBAND?
Response
+NBAND: n[,n[,n[…]]]
OK
Execute Command
AT+NBAND=?
Response
+NBAND: (n[,n[,n[…]]])
OK
<n> Band as a decimal number
AT+NLOGLEVEL Set Debug Logging Level
Set Command
AT+NLOGLEVEL=<core>,<level>
Response
OK
+CME ERROR: <err>
Read Command
AT+NLOGLEVEL?
Response
+NLOGLEVEL: <core>,<level>
OK
Execute Command
AT+NLOGLEVEL=?
Response
+NLOGLEVEL: (<core>, …),(<level>,<level>, …)
Quectel
Confidential

Quectel BC95 Specifications

General

Brand	Quectel
Model	BC95
Category	Control Unit
Language	English