Quectel BC95 User Manual

NB-IoT Module Series
BC95 AT Commands Manual
BC95_AT_Commands_Manual Confidential / Released 52 / 58
5 Temporary Commands
As part of development, some commands are temporarily added. They are unsupported and may
disappear, or change behaviour, without warning. They are listed here for completeness.
5.1. AT+NTSETID Set ID
Set system identities such as UUID or IMEI value. This is a temporary command that will be replaced with
a production tool.
Parameter
Example
AT+NTSETID=1,123456789012345
OK
Neul Hi2110 Implementation
 IMEI is persistent.
 SVN is not persistent and will default to 0x00.
 IMEI can only be set when the radio is inactive (AT+CFUN=0 will force the module to enter into this
state).
AT+NTSETID Set ID
Set Command
AT+NTSETID=<snt>,<data>
Response
OK
+CME ERROR: <err>
<snt> Integer type indicating the serial number type that has been requested
1 Set the IMEI
2 SVN
<data> If <snt>=1 IMEI 15-character string type in decimal format
If <snt>=2 SVN 2 digit SVN
Quectel
Confidential

Quectel BC95 Specifications

General

Brand	Quectel
Model	BC95
Category	Control Unit
Language	English

Summary

About the Document

History

Document revision history and changes.

Introduction

Definitions

Explains AT command syntax elements like CR, LF, brackets.

AT Command Syntax

Details the structure for test, read, set, and execute AT commands.

AT Command Responses

Describes OK, ERROR, and unsolicited result code formats.

3GPP Compliance

States compliance with 3GPP TS 27.007 v13.5.0.

Implementation Status

3GPP Commands

Lists and describes standard 3GPP AT commands.

AT+CGMI Request Manufacturer Identification

AT+CGMM Request Manufacturer Model

AT+CGMR Request Manufacturer Revision

AT+CGSN Request Product Serial Number

AT+CEREG EPS Network Registration Status

AT+CSCON Signalling Connection Status

AT+CLAC List Available Commands

AT+CSQ Get Signal Strength Indicator

AT+CGPADDR Show PDP Addresses

AT+COPS PLMN Selection

AT+CGATT PS Attach or Detach

AT+CIMI Request International Mobile Subscriber Identity

AT+CGDCONT Define PDP Context

AT+CFUN Set Phone Functionality

AT+CMEE Report Mobile Termination Error

Neul Commands

AT+NMGS Neul Send Message Command

Sends messages to the network via the CDP server.

AT+NMGR Neul Get Message Command

Retrieves messages from the CDP server.

AT+NNMI Neul New Message Indications

AT+NSMI Neul Sent Message Indications

AT+NQMGR Neul Query Messages Received

AT+NQMGS Neul Query Messages Sent

AT+NRB Neul Reboot

AT+NCDP Configure and Query CDP Server Settings

AT+NUESTATS Query UE Statistics

AT+NEARFCN Specify Search Frequencies

AT+NSOCR Create Socket

AT+NSOST SendTo Command (UDP Only)

AT+NSORF Receive Command (UDP Only)

AT+NSOCL Close Socket

+NSONMI Socket Message Arrived Indicator (Response Only)

AT+NPING Test IP Network Connectivity To A Remote Host

AT+NBAND Set Supported Bands

AT+NLOGLEVEL Set Debug Logging Level

AT+NCONFIG Configure UE Behaviour

Temporary Commands

AT+NTSETID Set ID

Sets system identities like IMEI or SVN.

Error Values

Examples

Attach Network

Example of manually attaching the module to the network.

CoAP Messages

Example for sending and receiving CoAP messages.

UDP Messages

Example for sending and receiving UDP messages.

Appendix A Reference