LTE-A Module Series
EG06 Hardware Design
EG06_Hardware_Design 14 / 89
1.
1)
GNSS function is optional.
2.
2)
EG06 series module (EG06-E/EG06-A/EG06-LA/EG06-APAC/EG06-AUTL) contains Telematics
version and Data-only version. Telematics version supports voice and data functions, while
Data-only version only supports data function.
3.
3)
B32 and B29 support Rx only, and in 2×CA they are only for secondary component carrier.
With a compact profile of 37.0mm × 39.5mm × 2.8mm, EG06 can meet almost all requirements for M2M
applications such as automotive, metering, tracking system, security, router, wireless POS, mobile
computing device, PDA phone, tablet PC, etc.
EG06 is an SMD type module which can be embedded in applications through its 299-pin LGA pads.
2.2. Key Features
The following table describes the detailed features of EG06 module.
Table 2: Key Features of EG06 Module
WCDMA
(with
Rx-diversity)
GPS,
GLONASS,
BeiDou/
Galileo,
QZSS
GPS,
GLONASS,
BeiDou/
Galileo,
QZSS
GPS,
GLONASS,
BeiDou/
Galileo,
QZSS
GPS,
GLONASS,
BeiDou/Galileo,
QZSS
GPS,
GLONASS,
BeiDou/Galileo,
QZSS
Supply voltage: 3.3V~4.3V
Typical supply voltage: 3.8V
Class 3 (24dBm+1/-3dB) for WCDMA bands
Class 3 (23dBm±2dB) for LTE-FDD bands
Class 3 (23dBm±2dB) for LTE-TDD bands
Support up to CA Cat 6 FDD and TDD
Support uplink QPSK and 16-QAM modulation
Support downlink QPSK, 16-QAM and 64-QAM modulation
Support 1.4MHz to 20MHz (2×CA) RF bandwidth
Support MIMO in DL direction
To Next Page
Loading...
Need help?
General
