Quectel EG06 Series User Manual

LTE-A Module Series
EG06 Hardware Design
EG06_Hardware_Design 52 / 89
The following table describes the characteristic of the ADC interfaces.
Table 17: Characteristics of ADC Interfaces
1. The input voltage of ADC should not exceed that of VBAT_BB.
2. It is prohibited to supply any voltage to ADC pins when VBAT is removed.
3. It is recommended to use resistor divider circuit for ADC application.
3.14. Network Status Indication
The network indication pins can be used to drive network status indication LEDs. The module provides
two pins which are NET_MODE and NET_STATUS. The following tables describe pin definition and logic
level changes in different network status.
Table 18: Pin Definition of Network Connection Status/Activity Indicator
Table 19: Working State of the Network Connection Status/Activity Indicator
Parameter
Min.
Typ.
Max.
Unit
ADC0 Voltage Range
0.15
VBAT_BB
V
ADC1 Voltage Range
0.15
VBAT_BB
V
ADC Resolution
15
bits
Pin Name
Pin No.
I/O
Description
Comment
NET_MODE
147
DO
Indicate the module’s network
registration mode.
1.8V power domain
NET_STATUS
170
DO
Indicate the module’s network activity
status.
1.8V power domain
Pin Name
Status
Description
NET_MODE
Always High
Registered on LTE network
NOTES

Quectel EG06 Series Specifications

General

Brand	Quectel
Model	EG06 Series
Category	Control Unit
Language	English