Quectel EG06 Series User Manual

LTE-A Module Series
EG06 Hardware Design
EG06_Hardware_Design 20 / 89
1. Keep all RESERVED pins and unused pins unconnected.
2. GND pads 215~299 should be connected to ground in the design.
3.3. Pin Description
The following tables show the pin definition and description of EG06 module.
Table 3: I/O Parameters Definition
Type
Description
IO
Bidirectional
DI
Digital input
DO
Digital output
PI
Power input
PO
Power output
AI
Analog input
AO
Analog output
OD
Open drain
Table 4: Pin Description
Power Supply
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
VBAT_BB
155,156
PI
Power supply for
the module’s
baseband part.
Vmax=4.3V
Vmin=3.3V
Vnorm=3.8V
It must be able to
provide sufficient
current up to 0.8A.
VBAT_RF
85, 86,
87, 88
PI
Power supply for
the module’s RF
part.
Vmax=4.3V
Vmin=3.3V
Vnorm=3.8V
It must be able to
provide sufficient
current up to 1.8A in a
transmitting burst.
NOTES

Quectel EG06 Series Specifications

General

Brand	Quectel
Model	EG06 Series
Category	Control Unit
Language	English