GSM/GPRS/GNSS Module Series
MC60 Series Hardware Design
MC60_Series_Hardware_Design Confidential / Released 2 / 114
About the Document
History
1. Added the description of QuectelFastFix Online
function (Chapter 3.15)
2. Added the description of 1PPS function (Chapter
3.17)
3. Updated Figure 27 (recommend using a switch for
connection between Auxiliary and GNSS UART ports
in Stand-alone solution)
Optimized the ESD performance parameter in Table 38
1. Added the description of Periodic Mode (Chapter
3.4.2.4)
2. Added the description of AlwaysLocate
TM
mode
(Chapter 3.4.2.5)
3. Added the description of GLP Mode (Chapter 3.4.2.6)
4. Added the description of PCM interface (Chapter 3.9)
5. Added the description of LOCUS (Chapter 3.18)
6. Added the current consumption data of BT function
(Table 44)
1. Added the description of SD card interface (Chapter
3.13)
2. Modified the description of Standby mode in
operating modes of GNSS part (Chapter 3.6.2.2)
3. Updated the operating modes of GNSS part in
All-in-one solution (Table 13)
4. Added BLE function description of MC60E module
(Chapter 3.6.5)